Bridge clamp — locks the top corner castings of two side-by-side containers together horizontally, turning a row of containers into a single braced wall when used with twistlocks.
No prices online — quotations are prepared per application and quantity, usually within one business day; a more involved enquiry may take a little longer.
| Material | Steel (can be hot-dipped galvanised) |
|---|---|
| Load Rating (SWL) | SWL 50 kN — MBL 100 kN, tension only. Not rated for vertical load |
| Dimensions | Available in 280 mm and 380 mm lengths |
| Finish / Coating | Hot dipped galvanised |
Load ratings are as published in the TLA 2026 catalogue. Site-specific ratings and certification: on request.
Horizontal locking of side-by-side containers into braced walls; temporary fixing during container construction or fabrication.
The bridge clamp draws adjacent containers tight across their top corner castings, adding the horizontal restraint that twistlocks alone do not provide and turning a row of boxes into a braced wall. It is also the usual choice for temporary fixing during construction, fabrication or assembly, where the clamp has to come off again afterwards. Supplied hot-dip galvanised.
⬇ Download the datasheet (PDF · draft A)
◫ Request the 3D model (STEP) — WhatsApp engineering
◇ Technical drawing — included in the datasheet above.
Manual double-ended twistlock — the industry-standard connector that locks ISO container corner castings together for safe vertical stacking, with a hand-thrown lever and clear locked/unlocked indication.
Semi-automatic double-ended twistlock — engages automatically as one container lands on another; pull the toggle to lock it open for the next lift, giving crane crews an at-a-glance 'ready to lift' signal.
Fully automatic twistlock — locks itself when containers are stacked and releases on lift, removing manual handling from routine cycles for the highest-throughput terminal operations.
Stacking cones — a low-cost alternative to manual twistlocks for locating and stacking containers corner-to-corner; single, dummy, side-by-side, transverse and quad, in locally fabricated and imported options.