Container lifting frame for stable single-hook crane or overhead hoist lifts — attaches to all four ISO 1161 top corner castings and distributes load evenly, preventing racking stress and enabling safe lifting with a single hook.
No prices online — quotations are prepared per application and quantity, usually within one business day; a more involved enquiry may take a little longer.
| Material | Structural steel, S355JR |
|---|---|
| Load Rating (SWL) | Rated at order — standard configurations 30 tonnes total |
| Finish / Coating | Hot-dip galvanised |
| Design standard | SANS 1594; ASME B30.20 (below-the-hook); ISO 1161 interface |
| Certification | Designed per application by a certified vendor; proof-load tested by an authorised authority, certificate per unit |
Load ratings are as published in the TLA 2026 catalogue. Site-specific ratings and certification: on request.
Crane lifts in depots and yards without a spreader bar; overhead hoist lifts in workshops and buildings; single-hook lifting where a telescoping spreader bar is impractical.
Also known as a spreader frame or lifting beam, the lifting frame lets a single crane hook lift a container safely by distributing the load evenly across all four top corner castings via integrated ISO-compliant lifting lugs. Rigging a container from a single hook without one can rack the structure, damage the corner castings, or make the lift unstable. Available for 6 m (20 ft) and 12 m (40 ft) containers, and as a single unit that serves both. Every frame is designed for its application by a certified vendor and proof-load tested by an authorised testing authority before delivery; the certificate is issued for that specific unit and supplied with it. Confirm the container's gross weight when ordering.
⬇ Download the datasheet (PDF · draft A)
◇ Technical drawing — included in the datasheet above.
Container corner jack for levelling or full-container lifting; used with a 10-ton hydraulic jack, lifting each corner up to a maximum of 250 mm. A minimum of two is recommended, used as a pair to lift two adjacent corners.
Corner jack with integrated locking trestle rod; raises container corners ~200 mm and locks at height so the hydraulic jack can be removed; trestle rod SWL 4 tons per jack.
ConFoot CFU 20 — four self-contained hydraulic-jack legs lift a container off any trailer or chassis and lower it to the ground in 5–10 minutes, no crane or forklift required; 20-tonne set capacity; frees the truck to leave immediately.
Side-entry lifting lugs (left- and right-hand) inserted into the bottom corner casting side aperture for safe container lifting; SWL 12.5 tons per lug; certified lifting equipment — use in sets of 4.