
Corner jack
Container corner jack for levelling or full-container lifting; used with a 10-ton hydraulic jack, lifting each corner up to a maximum of 250 mm. A minimum of two is recommended, used as a pair to lift two adjacent corners.

Corner jack with integrated locking trestle rod; raises container corners ~200 mm and locks at height so the hydraulic jack can be removed; trestle rod SWL 4 tons per jack.
No prices online — quotations are prepared per application and quantity, usually within one business day; a more involved enquiry may take a little longer.
| Material | Steel |
|---|---|
| Load Rating (SWL) | Locking rod: 4 tons per jack (lifting done with hydraulic jack) |
Load ratings are as published in the TLA 2026 catalogue. Site-specific ratings and certification: on request.
Container levelling with a permanent height lock; maintenance or installation work requiring sustained container elevation without a jack under load.
A variation on the corner jack that can lock the container at the raised height once it has been jacked up, raising the corner by around 200 mm. Engaging the jacking rod locks the jack at the required height — rated at 4 tons per jack — so the hydraulic jack itself can then be removed while the container stays supported at the desired elevation.
⬇ Download the datasheet (PDF)
◇ Technical drawing — included in the datasheet above.
⛭ Available for hire — rates on application.

Container corner jack for levelling or full-container lifting; used with a 10-ton hydraulic jack, lifting each corner up to a maximum of 250 mm. A minimum of two is recommended, used as a pair to lift two adjacent corners.

ConFoot CFU 20 — four self-contained hydraulic-jack legs lift a container off any trailer or chassis and lower it to the ground in 5–10 minutes, no crane or forklift required; 20-tonne set capacity; frees the truck to leave immediately.

Side-entry lifting lugs (left- and right-hand) inserted into the bottom corner casting side aperture for container lifting; rated W.L.L. 40 t per set of 4 at a 36° sling angle (32 t at 50°); DNV type approved — use as a set of 4.

Top-entry lifting lugs for crane lifting via top corner castings; safety slider prevents accidental removal in use; rated W.L.L. 56 t for a set of 4 lugs used together; certified lifting equipment — use as a set of 4.